THM recycling solutions GmbH presents new products

THM recycling solution GmbH presents two new machine types as well as extensions of size variants for existing machine types.

Granulator Type ZMK1607 and ZMK2007

This new machine type is a new granulator series in an extra heavy and extremely reinforced version for demanding and difficult tasks, such as the shredding of electronic scrap, tire rubber, aluminum, copper and other metals, or the cleaning of tire wire from the recycling of vehicle tires. This machine type is available in a working width of 1600 mm and a drive motor of 250 kW (ZMK1607) as well as in a working width of 2000 mm with a drive motor of 315 kW (ZMK2007). Depending on the task, a hydraulically actuated pendulum pusher is optionally available for this machine type.

Universal Granulator XG2400

The second new type of machine is a Universal Granulator Type XG with which you can shred large bulky feed material in one stage to the desired final size. This machine can be used for the single-stage production of RDF, shredding of cable scrap which can be loaded with a jaw gripper, for the shredding of car tires and other materials. The Universal Granulator has a working width of 2400 mm and can be driven either with 1 x 200 kW or 2 x 200 kW, depending on the task.

This shredder is a combination of an AG Granulator and an XL Pre-Shredder. The cutting geometry of the rotor and stator blades is based on the already proven THM granulators of the ZM and AG series and the grinding housing comes from the XL Pre-Shredder. A combination of two successful and proven systems.

In order to expand the existing machine program of THM, the following new machine variants have been added to the existing series:

//www.thm-rs.de" target="_blank" >www.thm-rs.de:www.thm-rs.de

x

Related articles:

Issue 06/2020 In use for research

THM recycling solutions GmbH supplies small granulator type ZM300 for university research center

For this purpose, a small, yet robust and powerful shredder was needed. A granulator type ZM 300 series from THM recycling solutions GmbH fulfills these requirements on a small scale. The...

more
Issue 04/2020 UNIVERSAL GRANULATOR XG

Universal granulator for single-stage shredding

THM‘s Universal Granulator XG is used for single-stage shredding of a variety of different materials. Whether wood, RDF, cable scrap, electronic scrap, metals or other materials, the Universal...

more
Issue 04/2018 RDF production

High performance granulator ensures continuity and higher production

In order to ensure and expand the existing production capacity of the RDF plant, one of the two granulators in the plant was replaced in April 2018 by a new Granulator type AG2008 from THM recycling...

more
Issue 03/2020 Maximum efficiency during shredding

Doppstadt presents its highly efficient Inventhor Type 6

The Inventhor Type 6 is ready to follow in the large footsteps. To succeed in this, the best of both worlds was combined during development: All the experience from the DW 3060 series was...

more

Vecoplan – VRZ shredder for pre-shredding in recycling plants and primary industry

The stand-out feature of the Vecoplan VRZ shredder is its rotor – instead of conventional cutting tools, it is equipped with sickle-shaped ripping teeth, which safely break up and shred even bulky...

more