Effective, flexible, simple to maintain
High flexibility, simple maintenance, toughness, intuitive operation, and design to match - these are the major features that determine the functionality of the L3. With a screening area of 3.8 m² for coarse material and 7.3 m² for fines, it delivers up to 250 m³/h throughput. But that is by no means all. The new carefully chosen cartridge design of the screen decks means they can be removed as a unit and switched in a very short time. This simple removal makes maintenance, conversion and particle size changes easier, and represents a major increase in the machine‘s flexibility, especially in terms of grain size.
The mobility design is part of the higher flexibility. On the L3 the towbar is on the side where the oversize fraction is ejected. That frees up the medium grain discharge side, greatly simplifying in-line operation with a Stonefex stone separator or Hurrikan wind sifter. The oversize fraction can still be removed without problems, since the towbar folds up against the machine when in working position.
The modern design also facilitates maintenance. The access doors are positioned so that maintenance is simplicity itself. The chain drives are placed opposed the drive motors, so there is no need to remove the motors to replace chains or chain sprockets.
Thanks to the slip-on gears and torque support the machine needs no clutches, and the motors do not need to be aligned, making for faster and easier maintenance. The long service life of individual components likewise benefits maintenance. Large screen shaft bearing pins, larger and reinforced bearings, bigger chain sprockets and a duplex chain for the fine screen deck show that Komptech is always thinking about the details. The sturdy 7 m³ volume feed hopper can be raised manually or hydraulically for maintenance purposes, another way Komptech makes things easier, since that gives full access to the lower run chain conveyor, as well as the entire length of the fine screen deck.
The fines discharge conveyor fulfils several requirements at once. The one-piece design prevents material trickle at transfer points, while also giving high capacity. This higher capacity allows the conveyor to run at lower speed, requiring less power and causing much less wear.
The layout of the control panel is state of the art. Its intuitive menu guidance and easily understood symbols make operation easier and safer.
Output quality front and centre
The Multistar L3 can be fitted with numerous options that expand its range of applications. These include 2- or 3-axle central axle trailer or tractor-trailer configurations, a longer coarse screen deck, wind sifter for the medium and coarse conveyors, magnetic and roller separator on the discharge conveyors, and much more.
The wind sifter and magnet separator are extremely important factors in output quality. Whether in waste wood, biomass or green waste, the contrary content in input material is everywhere increasing, making efficient screening of the end product critical.