Kobelco strengthens its demolition and vehicle dismantling range


Source: Kobelco

Source: Kobelco
Following the introduction of the SK210D in 2016 and the recent unveiling of the SK350DLC-10, Kobelco Construction Machinery Europe B.V. (KCME) announced the launch of the SK140SRD – the manufacturer’s smallest machine designed for the demolition and recycling sector. Despite its smaller size, this machine is borne from 40 years of innovation and development in automotive dismantling and incorporates many of the same features as the larger models.
 
Around 6 Mio. vehicles reach the end of their useful lives in Europe each year but they still have a significant value as a source of spare parts. Modern vehicle recycling attempts to be as cost-effective as possible, but with strict EU directives on reuse/recovery and reuse/recycling targets, auto dismantling yards also need to consider the environmental impact of their processes.
 
Since launching its first automotive dismantling machines in Japan in 1979, Kobelco has continued to focus on developing the best possible equipment to aid the recycling and reuse of vehicles and vehicle parts. As a result, Kobelco’s dismantling machines are renowned for their high performance, reliability and efficiency, and the all-new Kobelco SK140SRD also promotes lower fuel consumption, lower noise and a significant reduction in CO2 emissions.
 
“Since launching our first dismantling model 40 years ago, we have sold more than 1200 machines as a result of constantly developing new equipment that meets the needs of our customers. While the exterior of the machines may look similar, the SK140SRD incorporates significant technological innovations, including a specialised frame and iNDr technology. In turn, these innovations help to improve durability, reliability, workability and safety. Kobelco demolition and recycling machines demonstrate excellent lifetime cost performance that becomes more evident the longer a machine is used and this next-generation automotive dismantling machine represents the best Kobelco has to offer,” says Peter Stuijt, KCME Product Manager.
 

www.kobelco-europe.com

Related articles:

2018-05

19th International Automobile Recycling Congress IARC 2019

The 19th International Automobile Recycling Congress IARC 2019 organized by ICM AG will be held from March 20 – 22, 2019 in the?Vienna Marriott Hotel in Vienna/Austria. Over 250 delegates from...

more

Bio-based solvent helping develop UK’s first industrial-scale car battery recycling project

Biotechnology company Circa Group, who produces bio-based solvent CyreneTM from waste cellulose, is participating in an innovative project aimed at developing the first UK industrial scale capability...

more
2019-1 Automobile recycler in Vienna

19th IARC International Automobile Recycling Congress 20 – 22 March 2019, Vienna/Austria

The congress will bring together all the links in the ELV recycling chain from car manufacturers, metal and plastic scrap traders, recyclers, shredder operators to policy-makers from all over the...

more
2020-05 Mobile eye-catcher

Scrap recycling company SYNETIQ from the UK turns green with SENNEBOGEN 830 E series

SYNETIQ has been on a remarkable growth trajectory since it launched last year, following the merger of four well-established businesses from the salvage and vehicle recycling industry. Now arguably...

more

20th International Automobile Recycling Congress IARC 2021 – 23 to 25 June

The 20th anniversary conference is being held in Geneva from 23 – 25 June 2021 as an onsite and virtual event. The innovation this year is that as well as the live conference, IARC21 will have two...

more