Ultimate package

Mobile electric material handler SENNEBOGEN 821 E with ceiling power supply and diesel Powerpack

Powered by a 90 kW electric motor and configured as a mobile version, the SENNEBOGEN 821 E moves a huge amount of material every day. It feeds one of Germany‘s most modern waste sorting facilities. Hufnagel Service, a family-run waste management company in Germany, opted for a material handler which is connected to the power supply via a permanently installed cable on the ceiling of the hall. However, the highlight is the diesel generator that replaces the rear ballast: With the SENNEBOGEN diesel Powerpack, the machine can be conveniently moved out of the hall for maintenance work and thus remains more agile than a stationary electric solution.

Electromobility is a diverse field, at least when you look at industrial applications. In this context, the focus is not so much on the use of batteries and their driving range; users also do not have to worry about the environmental and social compatibility of batteries. Instead, everything revolves around practical cable-based solutions that make sense economically, guarantee maximum flexibility and eco-friendly operation: With the SENNEBOGEN 821 E material handler, customer Hufnagel Service, together with the sales and service partner BRR in Germany, has now turned its energy-saving vision into reality. Since 2020, the economical electric material handler with 11 m sorting equipment has been part of one of the most modern waste sorting facilities in Germany and handles around 125 000 t of waste per year.

 

Innovative electric material handler SENNEBOGEN 821 E in the mobile version

Together with his brother Oliver, Marc Hufnagel runs the family business founded 25 years ago with a staff of around 200. With the commercial waste regulations that passed into law in 2018, the requirements for separating the material to be processed increased enormously. Since then, at least 30 % of recyclable materials must be extracted from commercial waste, which is otherwise destroyed in incineration plants.

As one of the first recycling companies in Germany, Hufnagel made the decision back in 2016 to build one of the most modern waste sorting facilities in Germany on its 12-hectare premises. Since last year, part of this plant has been the mobile electric material handler SENNEBOGEN 821 E: „Initially, we had used a SENNEBOGEN with a diesel engine in the 5000 m² hall in front of the shredder, and noticed that we didn‘t actually move it from the spot, except for maintenance work. Now we feed the plant with an electric material handler including an additional diesel generator at the rear. This 19 kW auxiliary engine allows the machine to remain just as maneuverable as the previous model. However, we are now saving on operating costs in a big way by relying on the electric drive.“

 

Profitable shift to electric material handler SENNEBOGEN 821 E

According to Marc Hufnagel, many other reasons speak in favor of switching to the environmentally friendly, electrically powered material handling machine: it produces no exhaust fumes and is therefore a welcome alternative for indoor use, can call up its full power immediately after the engine is started, and promises a much longer service life. It also requires less frequent maintenance, as oil or fuel filter do not have to be changed, for example. The 90 kW electric motor, classified according to IP65 enclosure protection, was not installed without reason, Marc Hufnagel further explains: „You can‘t imagine what a big problem the fire hazard caused by lithium-ion batteries has grown into in our industry. When these have not been properly removed before disposal and are subsequently damaged in the shredder, the heat generated usually leads immediately to minor or major fires that are difficult to extinguish.“

Such a risk also exists in his facility. In an event like this, an automated fire extinguishing system that monitors the entire facility with thermal imaging cameras initiates firefighting with foam, even if the electric material handler is still in the hall. „It may happen that our 821 E gets exposed to the foam before it can be driven out of the hall with the help of the Powerpack. The IP65 electric motor is ideally suited for the conditions in our hall: Additionally, we have to use a dust-binding system, which leads to an increased humidity in the air. And all these environmental conditions are difficult to cope with unprotected electrics,“ concludes Marc Hufnagel.

x

Related articles:

Issue 2019-02

Recycling expert OZO uses mobile electrical solution in hall operation

The regional recycling company OZO in Ostrava, Czech Republic, recently commissioned a new line for processing pre-pressed plastic bales. The heart of the line is an 818 Mobile with an electric motor,...

more
Issue 2019-1 New site – new machine

Clearaway Ltd. uses the SENNEBOGEN 821 E in waste recycling

Clearaway Ltd. offers a full service in the recycling and disposal of household and industrial waste in South Essex and the surrounding area. The company has a range of roll on roll off skips that can...

more
Issue 2018-02

SENNEBOGEN: compact material handler for the waste industry

Making its debut at the end of 2017 and developed specifically for the needs of the recycling and waste industry, the 817 E-series is SENNEBOGEN‘s smallest material handler to date. The first...

more
Issue 2021-02 Environmentally friendly recycling and disposal

Swiss recycling company Reinhard Recycling AG expands fleet

In the meantime, the fleet of the recycling experts has grown to eight machines: including a 355 E telehandler as an all-rounder on the site since 2019, an 830 E material handler on crawler tracks...

more
Coverstory recovery 6/2017

SENNEBOGEN 8100 EQ balance material handler revolutionizes scrap handling

Compellingly different

Robert Cimoszynski and Janusz Majewski, the two managing directors who run the family company, are currently experiencing an increase in visitor numbers to their 5.0 hectare scrapyard in Tarczyn. And...

more