Maximum efficiency during shredding

Doppstadt presents its highly efficient Inventhor Type 6

Doppstadt is consistently continuing its “Smart Solutions” concept with the Inventhor Type 6. The latest generation of slow speed shredders is designed to deliver maximum efficiency during shredding. At the same time, its intuitive operating concept and modular design guarantee maximum availability for a wide range of applications. As a result, it offers the best prerequisites to establish itself – just like its predecessor DW 3060 – as the first choice for anyone whose operations profit significantly from reliable and cost-optimized shredding.

The Inventhor Type 6 is ready to follow in the large footsteps. To succeed in this, the best of both worlds was combined during development: All the experience from the DW 3060 series was systematically analyzed and incorporated into the new machine’s concept. That said, the Inventhor Type 9 also serves a role model, which has been successfully using some of the technological innovations of the new series for two years. With the Inventhor Type 6, Doppstadt presents a new machine concept that is geared to deliver maximum efficiency and which has been based on suitability for practical use.

High performance economically

implemented

The heart of the Inventhor Type 6 is Doppstadt’s unique VarioDirect Drive concept. It leverages Doppstadt’s patented gearbox. This combination of mechanical and hydraulic power continuously transfers the driving torque to the shredding system. By doing so, the speed of the shredding shaft can be flexibly adapted to the different material throughput, while the drive is very efficient delivering optimum performance at a constant speed. Thus, it is also possible to stop and start the shredding process even under load. And in case of blockage, the Vario gearbox can automatically switch to reverse mode in order to reliably protect the Inventhor Type 6 from any damage. The shredder is equipped as standard with a Stage-V diesel engine generating 260 kW.

Perfectly designed down to the

smallest detail

The range of possible applications of the Inventhor Type 6 is very diverse. From landfills and recycling plants through to waste wood processing facilities; from pre-shredding through to homogenization in thermal waste processing operations. Thanks to our multi tool concept, the shredder can be quickly adjusted to different materials by switching out the entire shredding system (shaft with teeth, toothed bar and, if necessary, limiters). At the time of market launch, this configurable shredding system is available with tooth sizes in L and M including limiters. Another feature of the Inventhor Type 6 ensures that the shredding process goes smoothly: The Smart Hopper. It has a feed hopper volume of 2 m³, which can be increased up to approx. 5 m³ by using auxiliary attachment panels. This Smart Hopper can either be loaded and tilted batchwise or it can be set at a suitable angle such that the material automatically slides into the shredding area. To further improve the availability of the Inventhor Type 6, many components have been optimized to ensure easy accessibility and quick conversions. Our easy access concept with counter comb opening Page 3 of 5 up to an angle of 90° makes the entire shredding area and engine compartment easy to access. This means that maintenance and switchover procedures can be carried out quickly and safely.

User friendly and easy to combine

The Inventhor Type 6 is available as standard with a semi-trailer and tracked chassis so that it can also be moved automatically when required by the operating conditions. In combination with other Smart Solutions from Doppstadt, it can be expanded into a high-performance complete solution, e.g. with the Selector 800 and its rugged SWS 800 spiral shaft screening deck. The Inventhor Type 6 can be operated for the most part automatically using its presettable material programs. In addition, the machine is equipped with a user-friendly terminal with plain text display and includes a remote control with display to allow the user to control it manually.

From landfills and recycling plants through to waste wood processing facilities; from pre-shredding through to homogenization in thermal waste processing operations. After intensive testing, the Inventhor Type 6 is about to be officially launched soon. Even though all of the major industry trade shows have been cancelled or postponed, the launch and subsequent sales will take place in May of 2020 as planned.

www.doppstadt.de

www.youtube.com/user/doppstadtrecycling

x

Related articles:

Issue 2018-02

Doppstadt: Best Solution – Smart Recycling

Global presence, cross-sector product range and specific solutions for individual requirements: Doppstadt heads for the future and showcases a comprehensive product portfolio at the IFAT 2018. There...

more
Issue 2018-01 Powerful and versatile

The new DW 308 Rhino comminutes even the most difficult material, and works day and night

This new roller crusher fits in well wherever waste needs to be processed at throughput rates of 40 t/h and above. Its robust steel construction assures maximum durability and long service-lives. The...

more
Coverstory 2|2017

New SRF treatment facility from Sutco® UK delivers “climafuel” for cement kiln operator

To enable the use of SRF in cement kiln ovens the fuel has to be of a very high quality standard, requiring very low moisture contents, a high calorific value and very low concentrations of PVC. Sita...

more
Issue 2020-02 Flexible screening

Doppstadt combines drum and star screen processes

Continuously increasing demands are placed on screening machines. „State-of-the-art models such as the SM 518.2 are genuine all-rounders,“ according to Doppstadt Umwelttechnik GmbH Product Manager...

more
Issue 2018-05

THM recycling solutions GmbH presents new products

THM recycling solution GmbH presents two new machine types as well as extensions of size variants for existing machine types. Granulator Type ZMK1607 and ZMK2007 This new machine type is a new...

more