Engineering plastics: a growing recycling market


Plastics Recyclers Europe publishes the Strategy Paper on the state of play of the Technical Plastic Parts recycling. In 2020 EU will generate an additional 46% of plastic waste coming from the electrical & electronic (E&E) sector in comparison to the year 2000 1. Engineering plastics today are the third most widely used material, after packaging and building & construction applications and represent 16 % 2 of the total EU demand. They are extensively employed in both the automotive and the E&E sector as they are lighter, more durable, provide increased safety and overall have a better environmental performance when compared to other materials. Consequently, engineering plastics are the preferred material, replacing heavier and less resistant and less sustainable constituents. Taking into consideration the growing digitalisation, their production and use will continue to grow very fast.
 
This means that Europe will be facing a growing amount of waste from technical plastic parts 3. Recycling rates remain low, even though facilities and technologies to treat them do exist and are operational on an industrial scale. To give an example, only 300.000 tonnes of waste from electrical and electronic equipment (WEEE) was destined for recycling at specialized European facilities in 2017, whereas the recycling capacity needed amounts to around 3 million tonnes. 4
 
This shows the urgency needed to tackle the challenges that these streams present and to overhaul the obsolete waste management practices which have dominated previously. Antonino Furfari, Managing Director of PRE comments: ‘Today we need to reach for the untapped material which is not fully exploited yet. This will require extra effort to guarantee the conditions necessary for the recyclers of technical plastic to boost further investment with the goal of transforming this material into a high-quality product.’
 
The change will need to implement an improved and increased collection system as well as additional sorting infrastructure. These measures should be complemented by enabling free WEEE material circulation across the Member States. A consistent and stable legislative framework is also a prerequisite to boost investors’ confidence. The EU measures should lead to harmonized and balanced rules which increase the legal certainty for the end-of-waste criteria. Additionally, legal requirements should enable the appropriate management of substances of concern. EU wide certification for recycling facilities would ensure waste traceability and guarantee the highest standards to which a recycler must operate. The quality of the output material of a facility is key to its viability and success. 
 
The Plastics Recyclers Europe’s: Technical Plastic Parts Strategy Paper. The way ahead for Automotive and Electrical & Electronic plastics (Download link below) further elaborates on the measures that need to be taken in order to advance the treatment of this stream in the EU and presents the state of play in its production and recycling.
 
The advancing in the recycling of technical plastic parts will depend equally on the strengthened collaboration and coordination of the actions of the electronic appliances’ manufacturers, automobile manufacturers, sorting centres, waste managements and recyclers, which is a must.
 
www.plasticsrecyclers.eu
 
 
 
1 Urban Mine Platform. Available online at: http://www.urbanmineplatform.eu/composition/eee/materials
2 Source: Plastics – the Facts 2018. An analysis of European plastics production, demand and waste data.
3 An alternative name for engineering plastics
4 Source: Responsible recycling of WEEE plastics containing Brominated Flame Retardants-BFR’s. EERA.2018

TECHNICAL PLASTIC PARTS STRATEGY PAPER THE WAY AHEAD FOR AUTOMOTIVE AND ELECTRICAL & ELECTRONIC PLASTICS WASTE

Related articles:

Plastics Recyclers Annual Meeting 2018

Today far too much plastic waste still escapes the European collection systems. Failing to collect plastic waste leads to a loss of valuable resources and at the same time poses a risk to the natural...

more
04/2019

TOMRA Sorting Recycling has published a new eBook

The existential threat to oceans and marine life is a good enough reason to cut plastics waste, profitable new business opportunities are another. TOMRA Sorting Recycling has published a new eBook,...

more

Save the date for Plastics Recyclers Annual Meeting 2019

The conference “Design for Recycling – where quality plastics recycling” begins, 21 & 22 November 2019 in Brusels/Belgium, will focus on the recyclability of plastics. Recycling of plastics...

more

Flexible polyethylene recycling in Europe

Plastics Recyclers Europe published a paper identifying the prerequisites for increasing recycling of flexible polyethylene into a high-quality raw material while ensuring a sustainable and...

more

PET Recycling industry installed capacity reviewed

78 PET recycling facilities located all over Europe were evaluated. The results point to a PET recycling capacity in Europe of 2.1 million tonnes for 2017. Of the total installed capacity in Europe...

more